Heat sink producer for both custom and standard heat sinks, Aavid Thermalloy Home | Contact Us | About Aavid A global manufacturer of custom and standard heat sinks.
Heat sinks, interface materials, attachments, request sample, rfq, more Custom, Software, Design Process, Thermal Assemblies, CFD, Model Shop  Articles, How to, Charts and Graphs, Thermal Resistance, Dimentional Tolerances, Correction Factors, Forced Convection Table, Downloads Sales Reps, Distributers, RFQ, Literature, Ordering Information Thermal solution trade shows, heatsink trade shows  

Search
  Search by part #
 

 Check distributor
  part inventory
 

Products

 Browse Products

 
 
 
 
 



  Useful Links
  MSDS Safety Sheets
  How to Order?
  Find Sales Rep
  Find Distributor
  Sample Request
  Quote Request
  Catalog Request
  Building a Part #
  Part # Cross Ref

62935
VIS#004464

Printer Friendly Version

This part is in stock!
Inventory Snapshot: 232 feet* (Last Updated September 11, 2006)
*Current inventory on hand, listed in FEET. Due to fluctuating demand for material, contact your local sales rep to confirm availability, specifically for production volumes.

Part
Number		 Thermal Resistance
°C/W at 3in length		 Width
in		 Height
in		 Surface Area
in?in		 Weight
lb/ft		 Part
Class
62935 5.71 2.03 0.80 12.3 1.00 C

Thermal Curves
based on 3.000 in length
New Length in mm
  

Natural Convection

  Heat Sink Temperature Rise
Above Ambient 		    Heat Sink
Thermal Resistance
65.0
3.2 5.5 7.4 9.2 10.9 12.5 14.0 15.5 16.9 18.3 19.6 21.0 22.2 23.5 24.8 26.0 27.2 28.4 29.6 30.7 31.9 33.0 34.1 35.2 36.3 37.4 38.5 39.6 40.6 41.7 42.7 43.7 44.7 45.8 46.8 47.8 48.8 49.7 50.7 51.7 52.7 53.6 54.6 55.5 56.5 57.4 58.3 59.3 60.2 61.1
48.8
32.5
16.2
0.0
  1.0 3.0 5.0 7.0 9.0
  
17.00
16.249 13.664 12.347 11.490 10.867 10.382 9.990 9.662 9.382 9.138 8.923 8.731 8.558 8.401 8.257 8.125 8.003 7.889 7.783 7.684 7.591 7.503 7.420 7.342 7.267 7.196 7.128 7.064 7.002 6.943 6.886 6.832 6.780 6.729 6.681 6.634 6.589 6.545 6.502 6.461 6.422 6.383 6.346 6.309 6.274 6.239 6.206 6.173 6.142 6.111
12.75
8.50
4.25
0.00
  1.0 3.0 5.0 7.0 9.0
  Power Dissipated (W)     Power Dissipated (W)

Forced Convection

  Heat Sink Temperature Rise
Above Ambient (10W Dissipated) 		    Heat Sink
Thermal Resistance
  Air Flow (m/s)     Air Flow (m/s)
  1.0 2.0 3.0 4.1 5.1
45.0
39.4 36.5 34.1 32.2 30.5 29.1 27.9 26.8 25.8 24.9 24.1 23.4 22.8 22.1 21.6 21.1 20.6 20.1 19.7 19.3 18.9 18.6 18.2 17.9 17.6 17.3 17.1 16.8 16.6 16.3 16.1 15.9 15.7 15.5 15.3 15.1 14.9 14.7 14.6 14.4 14.2 14.1 13.9 13.8 13.7 13.5 13.4 13.3 13.1 13.0
33.8
22.5
11.2
0.0
  200 400 600 800 1000
  
  1.0 2.0 3.0 4.1 5.1
4.00
3.940 3.648 3.413 3.217 3.052 2.910 2.786 2.677 2.580 2.492 2.413 2.341 2.275 2.214 2.158 2.106 2.058 2.013 1.970 1.930 1.893 1.858 1.824 1.792 1.762 1.734 1.706 1.680 1.655 1.632 1.609 1.587 1.566 1.546 1.526 1.507 1.489 1.472 1.455 1.439 1.423 1.408 1.393 1.379 1.365 1.352 1.339 1.326 1.313 1.301
3.00
2.00
1.00
0.00
  200 400 600 800 1000
  Air Flow (LFM)     Air Flow (LFM)

Building a Part Number

Full Bar Length = 8.04ft

Base Part #
Bar
Length		 Finish Length
(use zeros for full or half bars)
5 digit base part #
1 Full (normally 8-ft) F Unfinished 0 0 0 0 0
2 Half (small cut fee) F Unfinished 0 0 0 0 0
3 Custom
(cut to specified length)		 B Black Anodized
C Gold Chromate
U Unfinished*
V AavSHIELD3		 indicate length in inches
to three decimal places;
If the part is less than 10 inches, the first of these 5 digits (digit 7 of the 12 digit series) would be a zero (0).

_ _ _ _ _ _ _ _ _ _ _ _
62935 1 F 0 0 0 0 0

Examples:

If you wanted to simply order extrusion # 62935 in standard bar form, the part number would be:629351F00000. The unit price would be sold by the foot.

If you wanted extrusion 62935 cut to a length of 6.500" and black anodized, the part number would be:629353B06500. The unit price would be by the piece.

If you wanted extrusion 62935 cut to a length of 14.725" and a wash finish, the part number would be:629353U14725. The unit price would be by the piece.

*For unfinished extrusions with cut lengths other than half bar, the finish designation is a U.

Standard Aavid Thermalloy parts require all 12 positions to be complete.

Non-Standard Extrusions

Aavid Thermalloy has over 10,000 extrusion profile designs on file, most with the extrusion die already available. These parts have minimum order requirements and longer lead times, but may be cost effective compared to a new design.

Customizing & Advanced Capabilities

We offer several options for those applications which require a more unique solution. Challenge us with your thermal requirements - we can design custom solutions.








Home  •  Aavid's Family of Companies  • Sitemap
Disclamer Statement  •  ©2006 Aavid Thermalloy, LLC